 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TES 5WI Series, 5 Watt Features Compact SMD package 33.4 x 25.6 mm footprint Ultra-wide 4:1 input voltage range I/O isolation 1500 VDC Operating temp. range -40 C to 71 C Short circuit protection Input filter to meet EN 55022, class A Remote On/Off High accuracy of pin co-planarity Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D UL 60950-1 UL 60950-1 pending 3-year product warranty The TES-5WI series is a family of high performance 5W dc/dc-converter modules in a low profile SMD package with compact dimensions. The 14 modules feature ultrawide 4:1 input ranges with tightly regulated output voltage. High efficiency allows an operating temperature range of -40 to +71C without derating. Further features are built-in EMI-filter to meet EN 55022 class A without external components and remote On/Off control. The products comply with IPC J-STD-020D and are qualified for high temperature lead-free reflow solder process. Models Order code TES 5-2410WI TES 5-2411WI TES 5-2412WI TES 5-2413WI TES 5-2421WI TES 5-2422WI TES 5-2423WI TES 5-4810WI TES 5-4811WI TES 5-4812WI TES 5-4813WI TES 5-4821WI TES 5-4822WI TES 5-4823WI 18 - 75 VDC (48 VDC nominal) 9 - 36 VDC (24 VDC nominal) Input voltage Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 1`200 mA 1`000 mA 420 mA 335 mA 500 mA 210 mA 165 mA 1`200 mA 1`000 mA 420 mA 335 mA 500 mA 210 mA 165 mA Efficiency typ. 76 % 80 % 83 % 83 % 80 % 83 % 83 % 76 % 80 % 83 % 83 % 80 % 83 % 83 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TES 5WI Series Input Specifications Input current at full load Input current at full load Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) Reverse voltage protection Reflected input ripple current Input filter 24 V models: 250 mA typ. 48 V models: 125 mA typ. 24 V models: 20 mA typ. 48 V models: 10 mA typ. 24 V models: 9 VDC / 8 VDC typ. 48 V models: 18 VDC / 16 VDC typ 24 V models: 50 V max. 48 V models: 100 V max. 1.0 A max. 24 V models: 10 mA typ. 48 V models: 5 mA typ. EN 55022 class A, FCC part 15, level A 2 % - Input variation Vin min. to Vin max. 1.0 % max. - Load variation 10 - 100 % single output models: 1.0 % max. dual output models balanced load: 3.0 % max. 10 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) 0.02 % / C max. 85 mVpk-pk max. 6 % max. peak variation 500 S max. response time 200 s typ. >115 % of Iout max. continuous, automatic recovery 3.3 & 5 12 15 5 12 15 - On: - Off: - Off idle current: - Operating - Case temperature - Storage VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: 2000 F 470 F 330 F 680 F 330 F 220 F 2.5 to 5.5 V or open circuit -0.7 to 0.8 V or short circuit pin 3 and pin 1/2 10 mA -40C to +71 C +100C max. -40C to +125 C 95 % rel H max. >1`000`000 h 1`500 VDC 750 pF max. >1`000 Mohm 340 kHz typ. (frequency modulation PFM) UL 60950-1, EN 60950-1, IEC 60950-1 CSA File No. 226037 http://directories.csa-international.org (entry pending) - Input/Output - Input/Output - Input/Output 5 Watt Output Specifications Voltage set accuracy Regulation Minimum load Temperature coefficient Ripple and noise Dynamic load response 25% load change Transient response (25% load step change) Current limitation Short circuit protection Capacitive load Remote On/Off General Specifications Temperature ranges Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217F, at 25C, ground benign) Isolation voltage (60 sec.) Isolation capacity Isolation resistance Switching frequency Safety standards Safety approvals All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 5WI Series Physical Specifications Case material Package weight Lead-free reflow solder process Moisture sensivity level (MSL) non conductive plastic (UL 94V-0 rated) 14 g (0.49 oz) as per IPC J-STD-020D as per IPC J-STD-033B MSL report level 2 www.tracopower.com/products/tes5wi_msl-report.pdf (publication pending) 5 Watt Outline Dimensions 33.4 (1.31) S Seating Plane Detail A Pin-Out Pin 1 2 3 Single -Vin (GND) -Vin (GND) No con. No con. No con. No con. No con. +Vout No con. -Vout +Vin (Vcc) +Vin (Vcc) No con. Dual -Vin (GND) -Vin (GND) Common No con. -Vout No con. No con. +Vout No con. Common +Vin (Vcc) +Vin (Vcc) No con. Remote On/Off Remote On/Off 10.2 (0.40) (0.016) 0.4 20.6 (0.81) 22.6 (0.89) 25.6 (1.01) 13 9 10 11 12 13 14 15 16 22 0.15 24 Detail A Top View 1. (0 .0 6) 5 23 24 1 12 2.7 (0.11) 15.24 (0.6) 2.54 (0.1) 1.5 (0.06) (0.006) 0.15 Pin Patterns: 2 x 2.54 (2 x 0.1) Dimensions in [mm], () = Inch Tolerances 0.25 (0.02) Pin pich tolerances 0.13 (0.005) 15.24 (0.6) 3 x 2.54 (3 x 0.1) 27.0 (1.06) 2.7 (0.11) 1.9 (0.059) (0.12) Specifications can be changed any time without notice. Rev. 07/08 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com 3.0 Page 3 of 3 |
Price & Availability of TES5-2410WI
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |